| Setup Info |
|
System Specifications Tanks Tank 92”l by 44”w by 32”h Front pane is diamante glass Sumps 79”l by 24”w by 24”h and 48”h by 24”w by 24”h
Main sump is fed via 2 durso overflows contained in 200mm weir box’s pipe in weirs is 50mm then reduces under tank to 40mm. Sump layout allows the dsb to be fed with water which has not been skimmed. The Deltec 902 is fed from first compartment sump also contains a small fuge. The large right had compartment is fresh water reservoir Return pumps are both 0cean Runner 6500’s and return via 32mm pipe Fuge and frag tanks are located 15meters away in garage and fed via a ehiem 1060
Fuge 60”l by 20”w by 14”h Frag tank 1 is 36”x36”x15” Frag Tank 2 is 60”x20”x15” Frag Tank 3 is 72”x24”x15” Live rock holding tank 48”x24”x24” this is used to increase the amount of rock contained within system. The Aqua Medic 5000 twin skimmer is fed from this tank. SkimmersDeltec AP902 Aqua medic 5000 twin Lighting4 x 400w halides 2 fitted with 10k XM bulbs and 2 fitted with 20k XM bulbs 2 x 140w Phillips 03 Actinics
Fuge lit by 2 x 125w 6400k envorlites Frag Tanks lit be 250w halides with coralvue 14k bulbs Circulation 4 closed loops 2 powered by sequence 11000’s and 2 powered by sequence 10000’s which turned on and off by my IKS
The two outlets at either end are each powered by sequence 11000 the four outlets situated at front are powered by two sequence 10000's all four pump share the same manifold for intakes which is made from 50mm pipe all outlets are made from 40mm pipe. Diagram below shows the closed loop manifold
|
||||||||||
| Next > |
|---|
